Al Foil EPE Sealing Machines Aluminum
Al Foil EPE Sealing Machines Aluminum Manufacturers China
Code EQMH-CHINA-MY3305001
Origin China
Export Worldwide
Al Foil EPE Sealing Machines Aluminum
Home / Our Products / Food Processing Machines in Kenya / Aluminum Foil EPE Sealing Machines in Kenya
Machines & equipment
Aluminum Foil EPE Sealing Machines
Aluminum Foil EPE Sealing Machines Manufacturers China
Manufactured in China, quality-checked before dispatch and exported worldwide. Send us a specification for a same-week quotation.
Aluminum Foil EPE Sealing Machines
Quick answer: This machine produces aluminium foil easy-peel ends (EPE) for cans, feeding the lid ring, punching, deep drawing, curling and heat sealing the foil membrane in one automatic sequence, and it is particularly suited to larger metal easy-tear lids. Choose it by the can diameter, the ring and foil specifications, and the lids per minute you need.
Aluminum Foil EPE Sealing Machines range
1 model, each linked to its full specification page.
| Product | Code | What to confirm |
|---|---|---|
| Al Foil EPE Sealing Machines Aluminum | EQMH-CHINA-MY3305001 | See product page |
How to choose Aluminum Foil EPE Sealing Machines
The Al Foil EPE Sealing Machines Aluminum is a single model for lid makers and canners who want to produce peelable foil ends in-house. The key decision is whether your lid sizes and materials fit the machine. Easy-peel ends are made by sealing a foil membrane onto a punched metal ring; the machine's tooling sets the diameter and profile, so list every can diameter you make, including larger formats used for milk powder, infant formula, coffee, nuts and dry foods.
Next compare output with your can line. Lid production should exceed can filling demand with a margin for changeovers and quality rejects. Finally, decide how you will verify the seal: peel force and leak tests are standard in this application, and if you supply powdered food producers they will expect consistent opening force and no leaks. Ask whether tooling for additional diameters is available and what changeover involves.
Specifications and standards
Compare lids per minute, the range of lid diameters supported by tooling, ring material and thickness range, foil thickness and lacquer or heat-seal coating type, sealing temperature and pressure control, power and air requirements and machine footprint. Ask what inspection is fitted, such as detection of missing foil or seal defects, and how rejects are handled.
Ask for food-contact declarations for parts touching the lid surface, and work with your foil supplier to confirm the heat-seal coating is compatible with the ring material and the machine's sealing window. Request sample lids from a trial using your ring and foil, and test them for peel force, burst or leak resistance and, if relevant, behaviour after retort or vacuum filling of the can.
Who buys this range
Buyers are metal can and closure makers, milk powder and infant formula canners, coffee, nut and snack packers using tins, and packaging converters supplying easy-peel ends to food factories. Some large canners buy to secure their own supply of ends rather than relying on imports. Purchases are made directly and usually involve tooling and sample production before acceptance. Buyers typically ask for sample ends to be run through their own seamers and tested by their food customers before they confirm the order.
Peel force and consumer opening
An easy-peel end must stay sealed through filling, seaming, transport and pressure changes, yet open by hand with a reasonable pull. Peel force depends on the foil's heat-seal coating, sealing temperature, dwell time and pressure. Agree a target peel force range with your customers, test lids regularly during production, and record settings for each foil batch, since small changes in coating can shift opening force noticeably.
Matching ends to the seaming line
The finished end must suit the can body and the double seaming machine at the filling plant. Curl profile, compound and ring dimensions need to match the seamer's settings. Before full production, send ends from trials to the canning plant to run through their seamer and check seam measurements. This avoids discovering incompatibility after a large batch of ends has been made.
Frequently asked questions
Can the machine make different diameters?
Different diameters need different tooling sets. Tell us all the can sizes you produce so we can confirm which tooling is available and quote the sets you need with the machine.
What does EPE mean?
EPE stands for easy peel end: a can end with a metal ring and a sealed aluminium foil membrane that the consumer peels off by hand, instead of using a can opener or ring-pull scored metal end. It is common on powdered and dry food tins.
Do you supply the foil and rings?
The machine is quoted separately from consumables. We can advise on ring and foil specifications that suit the machine, and discuss supply if you need it. Your foil supplier must confirm the heat-seal coating is suitable for your product and process.
Is the end suitable for retorted cans?
Some easy-peel ends are designed for retort, but this depends on foil, coating and seal design, not the machine alone. If your cans are retorted, test sample ends through your full process before relying on them.
Related ranges
Request a quote
Send us the can diameters and lid profiles you need, ring material and thickness, foil specification if known, the product in the can and any retort or vacuum process, required lids per minute, and your power and air supply.
Request a quote for Aluminum Foil EPE Sealing MachinesAll categories
Need a custom build?
Send your capacity, voltage and destination port. We reply with drawings and a price within a working day.
Request a quotation