Skip to content
  • Machine manufacturer & exporter in China
  • Worldwide shipping
  • Reply within 24 hours
Menu
Get a quote
Machines & equipment
Tobacco Packing Machines

Tobacco Packing Machines Manufacturers China

Manufactured in China, quality-checked before dispatch and exported worldwide. Send us a specification for a same-week quotation.

Tobacco Packing Machines

Quick answer: These machines form, fill and seal very small porous fleece pouches of smokeless tobacco products such as snus, khaini and filter tobacco, with standard pouch widths of 12 or 18 mm, lengths of 25 to 45 mm and fills of about 0.2 to 1.0 g. Choose by pouch format, fleece material and output, and confirm your local packaging regulations first.

Tobacco Packing Machines range

3 models, each linked to its full specification page.

ProductCodeWhat to confirm
Snus Packing Machine Smokeless TobaccoEQMH-CHINA-MY3301001Bag Width standard: 12mm or 18mm
Special Bag Width: As per requirement
Filter Khaini Packing MachinesEQMH-CHINA-MY3301002Bag Width standard: 12mm or 18mm
Special Bag Width: As per requirement
Filter Tobacco Packing MachinesEQMH-CHINA-MY3301003Bag Width standard: 12mm or 18mm
Special Bag Width: As per requirement

How to choose Tobacco Packing Machines

The Snus Packing Machine Smokeless Tobacco, Filter Khaini Packing Machines and Filter Tobacco Packing Machines share the same basic pouch format and differ mainly in how they are set up for the product. Moist snus behaves differently from drier khaini blends in the dosing unit, so the filling system and its adjustment must suit your product's moisture and particle size. Send a sample so dosing can be tested.

Choose the pouch width (12 or 18 mm standard, others on request) and length to match your product's portion size, then check that the fill weight range covers it. Next consider output and what follows the pouching machine: pouches are usually counted into cans or boxes, which may be done manually at lower volumes or by an automatic counter and can filler. Finally confirm the fleece or filter paper you will use, since the sealing method must suit it.

Specifications and standards

Compare pouches per minute, pouch width and length range, fill weight range and its repeatability, the fleece or filter material the sealing unit is designed for, power and air requirements, and the counting or can-filling options available. Ask for the dosing method and how it is adjusted for moisture changes in the product.

Tobacco products are tightly regulated in most countries, including rules on health warnings, pack labelling, permitted product types and in some places outright bans on certain smokeless products. The machine does not make your product compliant. Confirm with your national authority what licences and packaging requirements apply before ordering, and ask us for machine documentation and material declarations for parts in contact with the product.

SpecificationValues across the rangeModels listing it
Bag Width standard12mm or 18mm …3
Diameter of film reel core70/76 mm …3
Weightapprox. 700 kg …3
Protection classIP 54 …3
Voltage Supply Standard400V/3/N/PE/50Hz …3
Wattageapprox. 5 KW …3

Who buys this range

Buyers are licensed manufacturers of smokeless tobacco products and contract packers working for them, typically in markets where these products are legally produced and sold. Some already pack loose product and are moving to portioned pouches; others are expanding pouch capacity.

Purchases are made directly, usually after a test with the buyer's product and fleece, and buyers often need supporting documents, such as material declarations, for their own regulatory filings.

Product moisture and dosing consistency

Smokeless tobacco blends vary in moisture and particle size, and these affect how consistently a small volumetric doser fills each pouch. Product that is too wet can clump and stick; too dry and it creates dust and light pouches. Keep the blend's moisture within a controlled range before packing, and set and check the doser regularly. Weighing samples of pouches at intervals is the practical way to monitor fill.

Fleece material and seal quality

The pouch material must let the product be used as intended while sealing reliably and not tearing in the can. Different fleeces and filter papers need different sealing methods and settings. Send us the material you plan to use, or ask what the machine is normally run with, and test sealed pouches for strength and appearance during the trial before committing to a material supply.

Frequently asked questions

Can one machine make both 12 mm and 18 mm pouches?

Pouch width is set by the forming parts, so changing width normally requires a set of change parts and resetting. Tell us which widths you need so the right parts are supplied with the machine.

Can these machines pack herbal or nicotine-free products?

The pouch format can be used for other fine, moist or dry herbal products, subject to testing of dosing and sealing. Send a sample of your product. Note that such products may still be subject to food, herbal or tobacco-related rules in your market.

Do you supply the counting and can filling equipment?

Counting and can or box filling can be discussed as part of the line. At lower volumes many producers fill cans by hand. Tell us your target cans per hour and pouches per can.

What documentation can you provide?

We can supply machine manuals, electrical documentation, material declarations for product-contact parts and origin documents. Regulatory approval of the tobacco product and its packaging is the producer's responsibility under local law.

Related ranges

Request a quote

Send us the product type and a description of its moisture, the pouch width and length, fill weight per pouch, the fleece or filter material, required pouches per minute, whether counting into cans is needed, and your power and air supply.

Request a quote for Tobacco Packing Machines
All categories
Need a custom build?

Send your capacity, voltage and destination port. We reply with drawings and a price within a working day.

Request a quotation

Tell us what you need to build

Send your specification, capacity and destination port. You get a quotation and a lead time back within one working day.