Bulldozer

At 100 HP the crawler dozer becomes a general contracting machine rather than a site tidy-up machine. It will hold a grade across road formation work, push fill at useful volume and handle light ripping, while still being transportable on a standard low-bed without a permit in most markets. Build is to order. The blade, undercarriage, ripper and cab are configured to the ground conditions and the contract, and we manufacture against the buyer's own specification rather than from a fixed catalogue build. Where a tender specifies its own annexure, we price and build against that.

The 120 HP crawler dozer covers the middle of the range, where most road, water and general civil contracts sit. It carries enough blade to move bulk fill productively but remains economical to run and straightforward to move between sites. Specification is settled before manufacture rather than chosen from stock. Blade geometry, ripper, track width, cab and emission compliance are all built to what the buyer states, and a tender with its own technical schedule is quoted against that schedule in full.

Construction 120HP Mechanical Driven Crawler Bulldozer

Construction 130HP Hydrostatic Crawler Bulldozer

Construction 160HP Crawler Bulldozers forms part of the Construction Machinery and Equipments equipment we build and ship to buyers overseas. This model is specified with a rated capacity of 4, a 160 hp motor and a machine weight of 17400 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. It ships as a single unit or as part of a larger consignment, built to the destination's electrical specification and released with complete export documentation. Send the output you need per hour and the destination port for a delivered price and a lead time.

Construction 160HP Crawler Swamp Bulldozers

The Construction 160HP Hydraulic Dozers sits in our Construction Machinery and Equipments range and is built to order for export. This model is specified with a rated capacity of 4, a 160 hp motor and a machine weight of 16800 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. Available as a single machine or consolidated into a bulk shipment, built to your site voltage and supplied with full export paperwork. Send your required capacity and destination port for a specification, a delivered price and a lead time.

Construction 160HP Hydraulic Driven Crawler Bulldozer

Construction 160HP Hydraulic Driven Crawler Swamp Bulldozer

The mechanical drive build of the 160 HP swamp dozer is specified where the work is heavy, the ground is soft and support is thin. On wide-track machines working soft ground, mechanical transmission has a practical advantage: there is less to go wrong far from a workshop, and what does go wrong can usually be put right on site. Wetland and reclamation contracts are almost always remote contracts. Wide tracks spread the machine's weight over a large footprint, keeping ground pressure low enough to operate on peat, paddy and soft fill. The correct track width depends on the bearing capacity of the ground you are working, which is why it is specified rather than fixed. Configuration is set at order against the buyer's own requirement, including tenders carrying their own technical annexure.

A swamp dozer differs from a standard crawler in one respect that governs everything else: the tracks are much wider, so the machine's weight is spread over a far larger footprint and ground pressure falls sharply. That is what lets it work on paddy, peat, reclaimed land, tailings and soft river margins where a standard dozer would sink and have to be recovered. At 160 HP the machine has the power for genuine bulk work rather than light land forming. The trade-off is that wide tracks reduce manoeuvrability and wear faster on abrasive ground, so the track width should be matched to the actual bearing capacity of the site, not simply specified as wide as possible. We build these to the buyer's requirement. State the ground conditions and the ground pressure the contract allows, and the undercarriage, blade and cab are configured to suit.

We manufacture the Construction 160HP Swamp Dozers as part of our Construction Machinery and Equipments range, for single-unit and bulk supply. Key figures for this model include a rated capacity of 4, a 160 hp motor and a machine weight of 18500 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. It is supplied as a single unit or in bulk container loads, built to the electrical supply of the destination and released with the export documentation the shipment needs to clear customs. Tell us the throughput you require and where it is going, and we will quote delivered with a lead time in writing.

A 165 HP hydraulic dozer is specified where blade accuracy matters as much as volume. Independent hydraulic drive to each track allows the operator to feather one side against the other, hold a line on a slope and counter-rotate in place. Contractors doing finish grading, canal profiles and formation work to tolerance choose hydraulic drive for that reason. The machine is built against the buyer's own schedule. Blade type, ripper, undercarriage, cab and emission compliance are all set at order, and where a tender defines its own technical annexure we manufacture and quote to that document.

Construction 165HP Hydraulic Driven Crawler Bulldozer

This machine combines two features that are usually specified for different reasons. The swamp undercarriage spreads weight across wide tracks so the dozer can work ground that will not carry a standard machine, and hydraulic drive gives independent track control for turning tightly and holding a blade line at low speed. Together they suit reclamation, canal and wetland work where the machine has to be both light-footed and accurate. At 165 HP it has the power for continuous bulk pushing rather than light forming alone. We manufacture to the buyer's specification, including against a tender's own technical annexure, rather than supplying a fixed build.

Construction 165HP Swamp Dozers is manufactured and exported by EMC Machines Manufactures as part of our Construction Machinery and Equipments range. Key figures for this model include a rated capacity of 7, a 165 hp motor and a machine weight of 19400 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. It is supplied as a single unit or in bulk container loads, built to the electrical supply of the destination and released with the export documentation the shipment needs to clear customs. Send the output you need per hour and the destination port for a delivered price and a lead time.

Construction 180HP Hydraulic Crawler Bulldozers

Construction 180HP Hydraulic Driven Crawler Bulldozer

A forestry dozer is a crawler machine protected for work among standing and felled timber. The difference from a standard dozer is in what is added rather than what it pushes: guarding over the cab and radiator, protection for cylinders and lines, sealing against debris, and commonly a winch for extracting timber and recovering the machine. At 180 HP in mechanical drive it is specified for land clearing, forest road formation and skidding support, where the machine works away from any service network and has to be repairable in place. Guarding package, winch, blade and cab are all built to the buyer's requirement rather than supplied to a single fixed forestry build.

The 180 HP swamp dozer in mechanical drive is specified where the work is heavy, the ground is soft and the support is thin. Mechanical transmission keeps the drivetrain simple enough to maintain with the owner's own fitters, which matters on reclamation and wetland contracts that are usually a long way from a service centre. The wide-track undercarriage is what allows the machine to operate at all on peat, paddy and soft fill, by spreading its weight far enough to stay above the bearing limit of the surface. Undercarriage, blade, cab and compliance are configured at order and manufactured to the buyer's specification.

At 180 HP the swamp dozer moves into heavy bulk work on ground that will not carry a conventional machine. The wide-track undercarriage keeps ground pressure low across peat, paddy, tailings and reclaimed land, while the power class allows sustained pushing rather than intermittent light forming. The heavier the machine, the more the track width has to be matched properly to the bearing capacity of the site. Specifying tracks wider than the ground actually needs costs manoeuvrability and undercarriage life for no gain. Build is to the buyer's own requirement, quoted and manufactured against the tender schedule where one is issued.

We manufacture the Construction 220HP Bulldozers as part of our Construction Machinery and Equipments range, for single-unit and bulk supply. Key figures for this model include a rated capacity of 7, a 220 hp motor and a machine weight of 24500 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. It is supplied as a single unit or in bulk container loads, built to the electrical supply of the destination and released with the export documentation the shipment needs to clear customs. Tell us the throughput you require and where it is going, and we will quote delivered with a lead time in writing.

Construction 220HP Desert Bulldozers forms part of the Construction Machinery and Equipments equipment we build and ship to buyers overseas. This model is specified with a rated capacity of 6, a 220 hp motor and a machine weight of 23400 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. It ships as a single unit or as part of a larger consignment, built to the destination's electrical specification and released with complete export documentation. Send the output you need per hour and the destination port for a delivered price and a lead time.

EMC Machines Manufactures the Construction 220HP Forestry Bulldozers within its Construction Machinery and Equipments division. Key figures for this model include a rated capacity of 7, a 220 hp motor and a machine weight of 25700 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. Supplied individually or in bulk, specified to the electrical requirements of your market and shipped with the documentation customs will ask for. Send your required capacity and destination port for a specification, a delivered price and a lead time.

Construction 220HP Hydraulic Driven Swamp Desert Forestry Bulldozer

The Construction 220HP standard Bulldozers sits in our Construction Machinery and Equipments range and is built to order for export. This model is specified with a rated capacity of 6, a 220 hp motor and a machine weight of 23400 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. Available as a single machine or consolidated into a bulk shipment, built to your site voltage and supplied with full export paperwork. Send your required capacity and destination port for a specification, a delivered price and a lead time.

Construction 230HP Elevated Sprocket Bulldozers

Construction 230HP Elevated Sprocket Swamp Bulldozers

High drive means the final drive sprocket is raised above the track line rather than sitting in it. Doing that lifts the drivetrain clear of the mud, rock and debris the tracks run through, so shock loads from the ground reach the undercarriage rather than the final drives, and the drives themselves can be serviced without breaking the track. On a 230 HP machine working long hours in abrasive material, that arrangement is usually specified for undercarriage life and downtime rather than for output. Hydraulic drive adds independent track control for tight turning and accurate blade work. We build to the buyer's own specification and quote against a tender's technical annexure where one is issued.

This machine carries the high drive elevated sprocket undercarriage on a swamp configuration. The raised final drive keeps the drivetrain out of the material the tracks are running through, which on wet and abrasive ground is where most undercarriage damage originates, while the wide swamp tracks hold ground pressure low enough to operate on soft surfaces. It is a combination specified for sustained work on tailings, reclaimed land and wet bulk sites, where a conventional undercarriage would both sink and wear quickly. Hydraulic drive gives the fine track control needed to work such ground without tearing it up. Configuration is built to the buyer's requirement, including against a tender annexure.

Construction 230HP Hydrostatic High Drive Elevated Sprocket Crawler Bulldozer

At 320 HP the crawler dozer is a bulk earthmoving machine: mass excavation, overburden stripping, dam and embankment fill, and push-loading scrapers. Production per hour rather than versatility is what it is bought for. The high drive undercarriage matters more at this size than at any other. A machine of this weight working continuously puts very high shock loads through the drivetrain, and raising the final drives out of the track line is what keeps those loads in the undercarriage where they can be absorbed and serviced. Blade, ripper, undercarriage and cab are specified at order and manufactured to the buyer's schedule.

EMC Machines Manufactures the Construction 320HP Hydraulic Bulldozers within its Construction Machinery and Equipments division. Key figures for this model include a rated capacity of 9, a 320 hp motor and a machine weight of 35900 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. It is supplied as a single unit or in bulk container loads, built to the electrical supply of the destination and released with the export documentation the shipment needs to clear customs. Send your required capacity and destination port for a specification, a delivered price and a lead time.

Construction 320HP Hydraulic Driven Crawler Bulldozer

The 320 HP dozer in hydraulic drive with a high drive elevated sprocket undercarriage is specified for continuous bulk production where downtime is expensive. Independent hydraulic track drive gives full power to either track through a turn rather than dividing it, which keeps the blade loaded while the machine changes direction. Raising the final drives above the track line takes the drivetrain out of the debris path, so ground shock is absorbed by the undercarriage and the drives can be serviced without splitting the track. The machine is manufactured to the buyer's own specification, quoted line by line against a tender's technical annexure where one exists.

Construction 430HP High Drive Crawler Dozers

At 430 HP this is the largest dozer in the range, specified for mass excavation, mine overburden and large dam and embankment work. Machines of this size are bought against a production figure in cubic metres per hour, and the blade is sized to the material rather than to the machine. The elevated sprocket undercarriage is standard practice at this weight. Lifting the final drives clear of the track line isolates them from ground shock and allows service without breaking track, which on a machine costing this much per idle hour is the point. Everything is configured at order. Where a tender carries a technical annexure, we build and price against that document rather than offering the nearest standard model.

An 80 HP crawler dozer sits at the light end of the tracked range, where the work is site levelling, backfilling trenches, forming estate and farm tracks, and spreading fill on plots too confined for a larger machine to turn in. At this power class the limit is usually access rather than production. We do not hold this machine to one fixed build. Blade type and width, track shoe width, ripper arrangement, cab specification and emission standard are all set against what the buyer asks for, and we manufacture to that schedule. Where a tender carries its own technical annexure, we quote and build to that annexure rather than offering a nearest match.

This is the 80 HP crawler dozer in mechanical drive. Mechanical transmission suits buyers who value a drivetrain that can be diagnosed and repaired in the field over one that gives finer control at the blade. On remote sites, and where the machine will be maintained by the owner's own fitters rather than a dealer network, that is usually the deciding factor. Everything above the drivetrain is specified at order. Tell us the blade and ripper configuration you need, the track width the ground demands and the cab standard the contract calls for, and the machine is built to it. Tender documents with a defined technical schedule are quoted line by line against that schedule.

EMC Machines Manufactures the Construction Hydrostatic Bulldozers within its Construction Machinery and Equipments division. Key figures for this model include a rated capacity of 3, a 130 hp motor and a machine weight of 13100 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. It is supplied as a single unit or in bulk container loads, built to the electrical supply of the destination and released with the export documentation the shipment needs to clear customs. Send your required capacity and destination port for a specification, a delivered price and a lead time.

Construction Hydrostatic Elevated Sprocket Dozers

A mechanical drive crawler dozer built to the power class the buyer specifies. Mechanical transmission is chosen where simplicity and field repair matter more than fine blade control: fewer components to fail, and failures that can usually be diagnosed and fixed on site rather than by a visiting specialist. Because the power class, blade, undercarriage and cab are all set at order, this listing covers the configuration rather than a single fixed model. State the work the machine is for and the conditions it will operate in, and we build to that. Tenders with their own technical schedule are quoted and manufactured against that schedule.

Construction160HP Hydraulic Driven Crawler Bulldozer

180HP forestry bulldozers — a crawler dozer at 180 horsepower specified for forestry work, with the guarding, sweeps and screens that protect machine and operator from falling timber and debris.

Forestry specification is not a trim level, it is a different machine. Falling object protection over the cab, a sealed and guarded underside, and radiator and cylinder protection are what keep a dozer working in standing timber rather than in the workshop. At 180 HP it sits in the mid range, suited to land clearing, access tracks and skidding rather than large-scale earthmoving. Contact us with your application and ground conditions for a specification.