Pet Food Machine

An automatic dog food machine producing dry kibble through extrusion, with the process stages running continuously rather than batch by batch. The mix is cooked, formed, cut, dried and coated as a single flow.

Automation matters most in the consistency it brings. Kibble sold under a brand has to look and behave the same bag to bag, and manual control of cooking and cutting struggles to hold that over a long shift. The degree of automation is specified at the order stage. Contact us with your intended output and product range for a configuration proposal.

A pet dog food extrusion machine producing kibble through cooking and expansion under heat and pressure. The mix is worked along the barrel, cooked, and expands as it leaves the die, where it is cut to size.

Expansion determines kibble density, which affects both how the product eats and how the bag looks when filled to its stated weight. Density is controlled through moisture, temperature and screw speed rather than being a fixed property of the machine, which means one extruder can produce quite different products from the same base recipe. Contact us with your product specification and we will advise on the settings and die profile required.

A dog food maker machine producing dry kibble through extrusion. It cooks the formulation, forms it to shape and cuts it to size, with drying and coating completing the process.

The machine covers a range of kibble shapes and sizes through die and cutter changes, so one unit can serve several products in a range: small breed, large breed and puppy formats are die changes rather than separate machines. Contact us with the shapes and sizes you need and we will confirm the die set required.

A dry pet food processing machine for cooking and forming kibble from a prepared formulation, covering the central stage of the production process.

Machine selection follows from the formulation more than from the tonnage. Recipes carrying high fat, fresh meat or high moisture content need a twin screw extruder to convey and cook them consistently, while standard dry mixes run perfectly well on a single screw at considerably lower capital cost. Discovering the difference after the equipment has arrived is an expensive correction. Contact us with your formulations as well as your target output, and we will recommend the configuration that will actually run them.

Pet food processing equipment covering mixing, extrusion, cutting, drying, fat and palatant coating, cooling and packing for dry pet food manufacture.

Equipment is available individually or as a matched line. Where machines are being added to an existing installation, the capacity of what remains determines what the new equipment should be: fit a faster extruder ahead of an undersized dryer and you simply move the bottleneck rather than remove it. We check the whole line before quoting on any part of it. Contact us with an inventory of your current machines and your target output for a recommendation.

A dog food machine maker's complete kibble production equipment, supplied and exported from China. The range runs from single machines through to full production lines with material handling and automated control.

We manufacture rather than resell, which means specification changes, additional die profiles and spare parts come from the same source as the machine itself. For buyers importing equipment into regions where technical support is not locally available, continuity of supply for wearing parts matters considerably more than the initial purchase price. Contact us with your requirements and destination port for a quotation covering equipment, export documentation and delivery.

Pet food manufacturing machinery supplied as individual machines or as complete production lines for dry pet food, covering dogs, cats and other companion animals.

Specification follows from three answers: your daily tonnage, the species and kibble formats in your range, and whether you are starting from nothing or extending an existing line. Those determine most of the rest of the decision, including whether a single or twin screw extruder is appropriate and how the drying stage should be sized. Contact us with those details and we will prepare an equipment list, layout drawing and quotation covering delivery to your port.

A dog food making machine quoted against your specification. Price depends on capacity, the degree of automation and whether you need the extruder alone or the complete line including drying, coating and packing.

Because those variables move the figure substantially, we quote against a specification rather than publishing a single price. The quotation covers the equipment, export documentation and delivery to your port, so the figure you see is the landed cost rather than the ex-works one. Contact us with your requirements for a detailed quotation.

A pet dog food extruder machine for producing dry kibble, cooking and forming the mix in a single pass before it is cut to size at the die face.

The extruder sets the character of the finished product. Density, texture, shape and size are all determined there, and no later stage in the line will correct them. Specifying it correctly against your formulation and your intended product formats is therefore the decision that carries the most weight in the whole installation. Contact us with your recipes and the kibble formats you need, and we will recommend a screw configuration and die set.

A cat and dog food extruder for producing dry kibble for both species from one machine. The two products are made by the same process and differ in formulation, kibble size and shape, all of which are changed through recipe and die rather than through different equipment.

For a producer covering both markets this avoids the cost of two separate lines, and makes it practical to add a second species without a major capital decision. Changeover is a die and recipe change. Contact us for the die sets needed to cover both product types.

A pet food machine producing dry kibble for dogs, cats and other companion animals, covering the cooking and forming stage of the manufacturing process.

It is supplied as a single machine or as the centre of a complete line, with mixing ahead of it and drying, fat coating and cooling after. Which you need depends on what you already have in place: producers scaling up often have mixing and bagging and need only the extrusion and drying stages, and there is no sense replacing equipment that works. Contact us with your intended output and an inventory of your existing machines.

A dog food pellet machine producing pelleted rather than extruded dog food. Pelleting presses the formulation through a die without the cooking and expansion that extrusion applies, which makes it cheaper to run.

The resulting product is denser and less palatable than extruded kibble, so it suits the economy and bulk feeding end of the market rather than premium retail. Where price per kilo is the deciding factor it is the right process. Contact us to discuss which route suits the product you intend to sell.

A pet dog feed production line for continuous dog food manufacture, covering mixing, extrusion, drying, coating, cooling and packing as a matched set with handling between stages.

The line is specified around daily tonnage and the number of products in the range. Where several recipes run on the same line, changeover time becomes a real and recurring cost, and the layout should allow for it rather than treating every run as if it were the only one. Intermediate storage is what makes the difference. Contact us with your product range and volumes for a line proposal and layout drawing.

A pet cat food making machine producing dry cat kibble. Cat food is formed smaller than dog food and formulated to higher protein levels, reflecting the cat's dietary requirements.

Cats are notably more selective than dogs, which puts the emphasis on palatability and therefore on the coating stage, where fat and palatant are applied to the dried kibble surface. That is where a cat food product is won or lost. Contact us with your formulation and target output for a configuration proposal.

A dog feed making machine producing dry dog food from a prepared formulation. The machine handles cooking and forming, with drying and coating following in the line.

Producing in-house rather than contract manufacturing gives control over formulation and cost per tonne, and removes the minimum order quantities that contract producers impose. For a brand with a defined recipe and steady volume it is usually the point at which making your own becomes worthwhile. Contact us with your current volumes and we will advise on sizing.

Dog food making machinery for dry kibble production, supplied as individual machines or as complete lines from mixing through to bagging.

The specification follows from three answers: daily tonnage, the kibble formats in your range, and whether you are starting from nothing or extending existing equipment. Those determine most of the rest, including the extruder configuration and how the drying stage should be sized. We supply new entrants to the market and established producers adding capacity, and the advice differs between the two. Contact us with those details and we will put together an equipment list and quotation.

A dog chew food processing machine for producing chew products rather than kibble. Chews are made to a denser, tougher specification, since the product is designed to be worked at over time instead of eaten quickly.

That difference changes the process: chews need higher mechanical energy during forming and longer, more controlled drying than kibble, and the formulation behaves differently in the barrel. The machine is built for that duty. Shapes and sizes are set by die and cutter. Contact us with the chew types you intend to produce.

A dog food maker for producing dry kibble, suitable for businesses entering pet food manufacture and for established brands bringing production in-house.

The decision to make rather than buy usually turns on volume and on how much control you need over the formulation. Below a certain tonnage contract manufacture is cheaper; above it, and particularly where recipes change often, in-house production pays. Contact us with your current volumes and we will give an honest view on whether the investment makes sense at your scale.

Pet food extruder machinery covering both single and twin screw configurations for dry pet food production, supplied with the die sets appropriate to your product range.

The choice between them is governed by the formulation rather than by output. Twin screw machines handle high fat, fresh meat and high moisture recipes that a single screw cannot convey consistently; single screw machines cost less to buy and are simpler to maintain where the recipe is stable and dry. Both are legitimate choices for the right product. Contact us with your formulations and we will compare the two against them honestly.

A dog food pellet making machine for producing pelleted dog feed. The formulation is compressed through a die under roller pressure, binding it into pellets that carry the complete ration in each piece.

This process costs less per tonne than extrusion in both capital outlay and energy consumption, which makes it the practical choice for kennels, working dog feed and economy products where cost per kilo matters more than appearance or palatability. Pellet diameter is changed by fitting a different die. Contact us with your market, your formulation and your tonnage for a recommendation and quotation.

A pet food making machine for producing dry pet food from a prepared formulation, covering cooking and forming with drying and coating following in the line.

Bringing production in-house gives control over the recipe and removes the minimum order quantities that contract manufacturers impose, which is often the real constraint on a growing brand rather than the unit cost itself. Whether it pays depends on your volumes and on how often your recipes change. Contact us with your current production figures and we will give a straight answer on whether the investment makes sense at your scale yet.

A dog feed machine for producing dog rations, suited to producers supplying kennels, breeders and the working dog market as well as retail.

Bulk and working dog feed is specified differently from premium retail product: the emphasis is on cost per kilo and consistent energy content rather than on shape and appearance. That affects the formulation and the coating but not the core process. The machine covers both. Contact us with your market and intended output and we will recommend a configuration.

A dry dog food machine producing shelf stable kibble. Dry food dominates the dog food market because it stores and transports without refrigeration and is simple to portion.

Shelf stability depends on drying to the correct moisture content. Under-dried product moulds in the bag, which in a retail supply chain is a recall rather than an inconvenience. The drying stage is specified accordingly rather than treated as an afterthought. Contact us with your target output and packaging format for a configuration proposal.

A dry dog and cat food making machine producing kibble for both species from one installation. The two products differ in formulation and kibble size, both of which are changed through recipe and die.

Running both on one machine avoids duplicating capital for a producer covering the two markets, and makes it practical to add the second species without a separate investment decision. Changeover is a recipe and die change rather than a rebuild. Contact us for the die sets needed to cover both.

Pet food production equipment for manufacturing dry food for dogs, cats and other companion animals at commercial scale, covering the full route from intake to bagging.

The equipment is built for continuous shift operation rather than intermittent production, which is what keeps the product consistent from the beginning of a run to the end. Batch processes drift as conditions change, and that drift shows up in the bag as variation in colour, density and size. Capacity and automation level are specified at the order stage. Contact us with your intended output and operating pattern for a quotation.

A dog food plant supplied as a complete installation, covering raw material intake, grinding, mixing, extrusion, drying, coating, cooling, and bagging.

Specifying it as a plant rather than assembling machines means every stage is sized against the others from the start. In kibble production the dryer is most often the limiting stage, and a plant designed around extruder throughput alone will not reach its stated output. We size around the whole process. Contact us with your target tonnage and building dimensions for a layout.

A dog food production machine for manufacturing dry dog food at commercial scale, built for continuous rather than intermittent operation.

Continuous running is what holds product quality steady: cooking conditions stabilise within the first part of a shift and stay there, whereas batch processes drift between batches and the variation is visible in the finished kibble. The machine is built for daily shift work, with the wear parts and maintenance access that implies. Contact us with your intended daily output and your operating pattern, and we will size the machine and quote accordingly.

A dog food processing line for continuous dry kibble production, supplied as a matched set covering mixing, extrusion, drying, fat and palatant coating, cooling and packing.

The stages are sized together so the line runs at a steady rate rather than queueing at one machine. In kibble lines the dryer is usually the stage that limits throughput, since drying time cannot be compressed the way throughput elsewhere can, and sizing it correctly from the start is what determines whether the line meets its rated output. Contact us with your target daily tonnage for a layout drawing and equipment list.

A dog dry food machine producing dry kibble, the format that accounts for the majority of dog food sold worldwide. Dry food stores without refrigeration and is simple to transport and portion, which is why it dominates the market.

The machine cooks and extrudes the formulation, cuts it to kibble size, and the line dries and coats it. Shelf stability comes from drying to the right moisture content, which is also what prevents mould in the bag. Contact us with your target output and kibble specification for a configuration proposal.

A dry pet food processing line producing kibble for dogs, cats or both, supplied as a matched set of machines with handling between the stages.

Where the line is to serve more than one species, that should be settled at the design stage, since it affects die sets, cutter options and how much intermediate storage is needed to cover recipe changes. Retrofitting multi-product capability to a line built for one product is more expensive than designing for it at the outset. Contact us with your intended product range and target output for a line proposal and quotation.

A dog chews processing line for manufacturing chew products at commercial scale, supplied as a matched set of machines with handling between them.

Chew production is slower per tonne than kibble because of the drying time involved, which means the line is sized around the dryer rather than the extruder. Getting that balance wrong is the most common error in a first chew installation. Capacity and product range are settled at the design stage. Contact us with your intended output for a layout drawing and quotation.

A dog kibble food machine producing the small formed pieces that make up dry dog food. Kibble size and shape are set by the die and cutter at the extruder.

Format is a genuine product decision rather than a detail: small breed, large breed, puppy and senior products are distinguished partly by kibble size, and a range covering several of them is produced by changing dies rather than by separate equipment. Contact us with the formats in your range and we will confirm the die set required.

A pet food extruder available for sale with full specification, export documentation and delivery to your nominated port, supplied in single and twin screw configurations.

We manufacture the equipment rather than reselling it, so specification changes, additional die profiles and spare parts come from the same source as the machine. For buyers importing into regions without local technical support, continuity of supply for wearing parts over the life of the machine matters considerably more than the initial purchase price. Contact us with your requirements and destination for a quotation covering equipment, documentation and shipping.

A dry dog food making machine for kibble production, covering the cooking and forming stage, with drying, coating and cooling completing the line.

Where the machine fits depends on what you already run. Producers scaling up from small equipment often have mixing and bagging already in place and need only the extrusion and drying stages, and there is no sense in replacing machines that are working perfectly well. We would rather specify what is genuinely needed than sell a complete line by default. Contact us with an inventory of your current equipment and we will advise accordingly.

A pet food processing line for continuous dry pet food manufacture, supplied as a matched set from mixing through extrusion, drying, coating and cooling to packing.

Sizing the stages against each other is what determines whether the line reaches its rated output in practice. In pet food lines the dryer is most commonly the limiting stage, because drying time is governed by the physics of moisture removal and cannot be compressed the way throughput elsewhere can. We size the line around it. Contact us with your target tonnage and building dimensions for a layout and equipment list.

A dog food extrusion machine producing dry kibble by cooking and expanding the formulation under heat and pressure.

Expansion determines kibble density, which in turn affects how the product behaves in the bag and in the bowl: too dense and it is hard for small dogs to eat, too light and the bag looks underfilled for its weight. Density is controlled through process settings rather than being fixed by the machine. Contact us to discuss the settings appropriate to your product specification.

A dog food press machine forming dog feed by compression rather than extrusion, pressing the prepared material through a die to produce a dense pellet or shaped piece.

Compression is simpler and cheaper to run than extrusion, at the cost of palatability and digestibility, since the formulation is not cooked during the process and the starch is not gelatinised. For economy products and bulk kennel feeding where cost per kilo governs the sale, that trade is usually acceptable. Contact us to discuss whether pressing or extrusion suits the product and market you are aiming at.

Dog food manufacturing equipment for commercial scale kibble production, covering the full route from raw material intake through to bagged finished product.

Commercial manufacture brings requirements that small batch equipment does not meet: consistency across long production runs, mechanical material handling between stages rather than manual transfer, and bagging that keeps pace with the line. The equipment is specified for that duty from the outset. Capacity and automation level are agreed at the design stage before manufacture begins. Contact us with your intended output and product range for a plant proposal and quotation.

A dog food extruder machine for producing dry kibble. The extruder cooks and forms the mix in one pass, with cutting at the die face determining kibble size and shape.

Die and cutter together define the finished appearance of the product, which in retail dog food is a significant part of how the brand is recognised. Changing shape is a matter of changing the die rather than modifying the machine. Supplied standalone or at the centre of a complete line. Contact us for available die profiles and sizes.

A dog food extruder, the machine at the centre of any dry dog food line. It cooks the formulation under heat and pressure and forces it through a die, where it expands and is cut to kibble size.

Extrusion does more than shape the product: it gelatinises the starch and makes the formulation digestible, which is what turns a mix of raw ingredients into food an animal can use. Kibble shape and size are set by die and cutter. Contact us for die options and line requirements.

A dog food extruder processing machine for continuous kibble production, taking a prepared mix and delivering cooked, formed kibble ready for the dryer.

Continuous running rather than batch operation is what makes commercial kibble production viable, since the cooking conditions stabilise and then hold, and the product is consistent from the start of a shift to the end. Batch processes drift, and the drift is visible in the finished product. The machine is built for that duty, with the maintenance access daily operation requires. Contact us with your intended daily output for sizing and a quotation.

A pet food extruder for dog food manufacturing, cooking and forming the mix into kibble in a single pass through the barrel.

The extruder is where the formulation becomes food: cooking gelatinises the starch and makes the ingredients digestible, which a simple pressed pellet does not accomplish. It is also where kibble shape, size and density are fixed, and no subsequent stage will alter them. Specification follows from your recipes and your intended formats rather than from tonnage alone. Contact us with both and we will recommend a screw configuration and die set.

A dog food production line covering the complete route from raw materials to bagged kibble: grinding, mixing, extrusion, drying, fat and palatant coating, cooling and packing.

Coating after drying rather than mixing everything in beforehand is what allows high fat inclusion and good palatability, and it is the stage that most affects whether an animal will actually eat the product. It is included as standard rather than offered as an option. Contact us with your product range and target output for a line proposal and a layout drawing sized to your building.

Automatic pet food processing equipment for continuous kibble production, covering mixing, extrusion, cutting, drying, fat and palatant coating, and cooling.

Coating is the stage that most affects whether an animal will eat the product. Fat and palatant are applied after drying, to the surface of the finished kibble, which is both more effective and more economical than including everything in the mix. The equipment includes a coater as standard. Contact us with your product specification and target output for an equipment list and quotation.

A twin screw dog food machine, using two intermeshing screws for better control of the extrusion process. Twin screw machines handle formulations that a single screw cannot move consistently.

That means high fat recipes, fresh meat inclusion and high moisture mixes, all of which are associated with premium products. If your range includes or will include those, a twin screw machine is not an upgrade but a requirement. Contact us with your formulations and we will advise whether it is necessary for what you intend to make.

An animal feed making machine for pellet production, compounding and forming rations for livestock, poultry and companion animals. Ground ingredients are mixed to formulation and pressed into pellets so that each piece carries the complete ration.

Pelleting prevents selective feeding, where animals pick out the grain and leave the rest, which both unbalances the diet and wastes the remainder. Pellet diameter is set by the die, so one machine covers several species by changing it. Supplied standalone or within a line with grinding and mixing ahead of it. Contact us with your species mix and daily tonnage.

A dog food extruder making machine supplied for dry kibble production, covering the cooking and forming stage of the process.

Where it sits in the line matters: grinding and mixing come before it and drying, coating and cooling after, and the extruder's throughput sets the rate for everything downstream. Sizing it correctly against the rest of the line is the first thing to settle. Contact us with your target output and we will specify the extruder and the equipment either side of it.

A dog chews food production line producing chew products from raw material through to finished packed goods. The line covers mixing, forming, drying, cooling and packing.

Chews are a premium category and the product is judged on appearance as much as on performance, so forming and drying have to be consistent piece to piece. Uneven drying shows as cracking and colour variation that a buyer will reject. We size the drying stage accordingly. Contact us with your product range and target tonnage for a line proposal.

Pet food manufacturing equipment for commercial scale production, covering the route from raw material intake through to bagged finished product.

Commercial manufacture requires consistency across long runs, mechanical handling between stages and bagging at line speed, none of which small batch equipment is built to provide. The equipment is specified for that duty from the start. Capacity, automation level and the number of products the line must carry are agreed at the design stage, since they affect layout and intermediate storage. Contact us with your intended output and product range for a plant proposal.

Pet food processing machinery for dry kibble production, covering the full manufacturing route from mixing through to packing.

Machinery is specified around output, product range and formulation. Formulation deserves particular attention: recipes with high fat content or fresh meat inclusion need a twin screw extruder to convey and cook them consistently, and discovering that after the equipment has been delivered is an expensive correction to make. We would rather ask the question first. Contact us with your recipes as well as your tonnage and we will specify against both.