Results for “D”

A dog food pellet making machine for producing pelleted dog feed. The formulation is compressed through a die under roller pressure, binding it into pellets that carry the complete ration in each piece.

This process costs less per tonne than extrusion in both capital outlay and energy consumption, which makes it the practical choice for kennels, working dog feed and economy products where cost per kilo matters more than appearance or palatability. Pellet diameter is changed by fitting a different die. Contact us with your market, your formulation and your tonnage for a recommendation and quotation.

A dog food plant supplied as a complete installation, covering raw material intake, grinding, mixing, extrusion, drying, coating, cooling, and bagging.

Specifying it as a plant rather than assembling machines means every stage is sized against the others from the start. In kibble production the dryer is most often the limiting stage, and a plant designed around extruder throughput alone will not reach its stated output. We size around the whole process. Contact us with your target tonnage and building dimensions for a layout.

A dog food press machine forming dog feed by compression rather than extrusion, pressing the prepared material through a die to produce a dense pellet or shaped piece.

Compression is simpler and cheaper to run than extrusion, at the cost of palatability and digestibility, since the formulation is not cooked during the process and the starch is not gelatinised. For economy products and bulk kennel feeding where cost per kilo governs the sale, that trade is usually acceptable. Contact us to discuss whether pressing or extrusion suits the product and market you are aiming at.

A dog food processing extruder for continuous kibble manufacture, cooking and forming the mix in a single pass before cutting at the die face.

Extruder configuration is specified around the formulation rather than the tonnage: high fat or high fresh meat inclusion needs a twin screw machine, while standard dry recipes run reliably on a single screw at significantly lower cost. Choosing the wrong one is an expensive mistake to correct once the equipment has shipped. Contact us with your formulation details and we will recommend the configuration that will run them.

A dog food processing line for continuous dry kibble production, supplied as a matched set covering mixing, extrusion, drying, fat and palatant coating, cooling and packing.

The stages are sized together so the line runs at a steady rate rather than queueing at one machine. In kibble lines the dryer is usually the stage that limits throughput, since drying time cannot be compressed the way throughput elsewhere can, and sizing it correctly from the start is what determines whether the line meets its rated output. Contact us with your target daily tonnage for a layout drawing and equipment list.

A dog food processing machine for converting a prepared formulation into finished kibble, covering the cooking and forming stage of production.

The machine is sized against the rest of the line, since its throughput sets the rate for everything downstream of it. Where it is being added to existing equipment, the capacity of what stays is the first thing to check: a larger extruder ahead of an undersized dryer produces no more finished product, only a queue. Contact us with details of your current line and your target output and we will specify accordingly.

A dog food production line covering the complete route from raw materials to bagged kibble: grinding, mixing, extrusion, drying, fat and palatant coating, cooling and packing.

Coating after drying rather than mixing everything in beforehand is what allows high fat inclusion and good palatability, and it is the stage that most affects whether an animal will actually eat the product. It is included as standard rather than offered as an option. Contact us with your product range and target output for a line proposal and a layout drawing sized to your building.

A dog food production machine for manufacturing dry dog food at commercial scale, built for continuous rather than intermittent operation.

Continuous running is what holds product quality steady: cooking conditions stabilise within the first part of a shift and stay there, whereas batch processes drift between batches and the variation is visible in the finished kibble. The machine is built for daily shift work, with the wear parts and maintenance access that implies. Contact us with your intended daily output and your operating pattern, and we will size the machine and quote accordingly.

Dog food production machinery built around a feed extruder, covering the cooking and forming stage with drying, coating and cooling following it in the line.

The extruder determines the character of the finished kibble: its density, texture, shape and size are all set there, and the stages afterwards preserve those properties rather than altering them. Getting the extruder specification right against your formulation is therefore the decision that carries the most weight in the installation. Contact us with your recipes and your target output and we will recommend a configuration and die set.

A dog kibble food machine producing the small formed pieces that make up dry dog food. Kibble size and shape are set by the die and cutter at the extruder.

Format is a genuine product decision rather than a detail: small breed, large breed, puppy and senior products are distinguished partly by kibble size, and a range covering several of them is produced by changing dies rather than by separate equipment. Contact us with the formats in your range and we will confirm the die set required.

A Doritos corn chips making machine manufacturing plant producing triangular seasoned corn chips of the familiar type, supplied as a plant covering nixtamalisation or masa handling through to seasoned finished chips.

Specified as a plant because the product depends on the whole sequence. Masa moisture decides how the sheet behaves, sheet thickness decides the bite, the pre-bake decides oil pickup, and the seasoning drum decides whether the flavour is even. One stage out of step shows in the finished chip. The brand name is used here only to describe the product type. Contact EMC Machines Manufactures with your intended daily tonnage and flavour range and we will set out the plant.

Double Open End Spanner

Carbon Steel/ Chrome Vanadium steel 31 CrV 3
Drop Forged, Matt Finish/ Polished Head
Hardened & Tempered
Chrome Plated/ Zinc plated/Black Finish/ Satin Finish
Generally Conforming to IS: 2028-1981

A double screw extruder with two intermeshing screws, giving positive conveying and close control of temperature and moisture through the barrel.

Twin screw machines handle what single screw machines cannot: high fat and high moisture recipes, fresh meat or fish inclusion, and co-extruded filled products. They cost more and are more complex to maintain, so they are worth specifying where the product range genuinely needs them rather than as a default upgrade. Contact us with your formulations and product plans and we will advise honestly on whether it is necessary.

A double screw fish food extruder, with two intermeshing screws rather than one. The twin screw arrangement conveys the mix more positively and gives better control of temperature and moisture, which matters when a formulation carries high fat or high moisture content.

Twin screw machines handle a wider range of recipes than single screw ones, including feeds with fresh fish content or high oil inclusion that a single screw struggles to move consistently. They are the choice where the formulation varies or where premium feeds are being produced. Enquire for a comparison against the single screw version for the recipes you intend to run.

A double screw food extruder for cooking and forming food products where the recipe demands more control than a single screw machine provides.

The two screws convey material positively rather than relying on friction against the barrel, which means the machine handles sticky, fatty and high moisture mixes that a single screw cannot move consistently. It also allows co-extrusion for filled products. Contact us with the products you intend to make, current and planned, and we will confirm whether the twin screw configuration is required.

A double-diaphragm plunger pump for moving abrasive, viscous and solids-laden fluids, used in mining slurry, drilling mud, concrete grout, sludge and dewatering duties.

The diaphragm arrangement is what lets this pump handle material that would destroy a centrifugal pump, because the plunger acts on hydraulic fluid behind a diaphragm rather than on the pumped medium itself, keeping abrasive solids away from the working parts. The result is a pump that tolerates slurry at pressure and has a predictable wear part schedule. Flow and head requirements determine the size. Contact us with your fluid, solids content, flow rate and discharge pressure for a selection.

Drain Opener Tool

Drilling and Bore Well Equipment

The Drinking Water Purification is one of the Water Treatment Solutions lines we manufacture and supply for export. This model is specified with a rated capacity of ( litres per hour): 250-500. Full technical detail is set out in the specification below. Listed under Water Purification Equipments. It ships as a single unit or as part of a larger consignment, built to the destination's electrical specification and released with complete export documentation. Tell us the throughput you require and where it is going, and we will quote delivered with a lead time in writing.