Results for “Feed Pellet Machine”

An animal feed pellet machine for compounding and pelleting rations for livestock, poultry and fish. Ground meal is compressed through a die so that each pellet carries the full formulation, which stops animals from selectively eating and cuts waste in the trough or pond.

Die hole size determines pellet diameter, so the same machine serves everything from chick crumb to cattle pellets by changing the die. It is used on farms mixing their own rations and by small feed mills producing for sale. We supply it as a standalone unit or built into a complete feed line with grinding and mixing ahead of it.

A sinking fish feed pellet machine producing dense pellets that settle through the water column. This is the correct product for bottom feeding species, including carp, shrimp and many catfish systems where feed is taken from the pond floor.

Pellet durability determines how much of the feed survives the descent intact. A pellet that breaks up on the way down is lost. Conditioning and die specification are what control it, and we advise on both rather than simply supplying a machine. Contact us with your species and formulation for a recommendation.

A floating fish feed pellet machine producing expanded pellets for surface feeding species. Expansion during forming is what makes the pellet buoyant, and the degree of expansion is adjustable through process settings.

How long a pellet needs to float depends on the species and how quickly it feeds. Slower feeding species need a pellet that stays up longer, and that is a matter of tuning the process rather than buying a different machine. Pellet size is changed by die. Contact us with your species and we will advise on settings and die selection.

A feed pellet machine producing compound feed pellets for livestock, poultry and fish. Meal is pressed through a die under roller pressure, binding the formulation into a pellet that animals eat whole rather than sorting through.

Pelleting reduces waste at the feeder, improves intake and makes feed easier to store and transport than loose mash. The machine covers a range of pellet diameters through changes of die, so one unit serves several species. It is used on farms milling their own ration and by small commercial mills. Available standalone or as part of a line with hammer mill and mixer. Enquire for sizing against your daily tonnage.

A fish feed pellet machine producing pressed pellets for aquaculture. Pressed pellets sink, which suits bottom feeding species and species that are not fed at the surface, and they are produced at a lower energy cost per tonne than extruded floating feed.

Where the species takes feed from the bottom, a sinking pellet is the correct product and a floating one is simply more expensive to make. The machine covers a range of pellet diameters by changing the die. Used by farms and small mills. Contact us to discuss whether sinking or floating feed suits the species you are raising.

A chicken feed pellet machine for producing poultry rations in pellet form. Pelleting a mash stops birds from picking out the grain and leaving the rest, which improves feed conversion and reduces the amount lost around the feeder.

Pellet diameter is set by the die, so the same machine covers crumb for chicks through to finisher pellets for grown birds. It is used by poultry farms mixing their own feed and by small mills supplying growers in their area. We supply the pellet machine on its own or as part of a line with grinding and mixing. Enquire with your flock size and we will size it for you.