Results for “Packing Machine”

EMC Machines Manufactures the Food Automatic Shrink Packing Machine within its Food Processing Equipment Line Machines Plants division. Key figures for this model include a 2 kW motor. Full technical detail is set out in the specification below. Listed under Filling and Packaging Machine. Supplied individually or in bulk, specified to the electrical requirements of your market and shipped with the documentation customs will ask for. Send your required capacity and destination port for a specification, a delivered price and a lead time.

A pyramid tea bag machine that additionally wraps each bag in its own envelope, running at 40 to 50 bags per minute. Pyramid bags are formed 50 to 80 mm long from food grade non-woven or nylon filter material, at a dosage of 5 to 40 cm³. The individual envelope is what this machine adds over a plain pyramid line, and it addresses the weakness of the format. A pyramid bag is porous by design, which is what makes it brew well and also what lets aroma escape and moisture in during storage; sealing each one in a heat-sealable laminate holds the tea at the condition it was packed in. It handles non-viscid granule materials generally, including green tea, black tea, health care products and spices. Envelopes are made from plastic/PE or plastic/foil/PE laminates, sized 80 to 110 mm high by 85 to 125 mm wide, from material rolls of 160 to 220 mm. Packing material for the pyramid itself runs 120 to 180 mm wide. The machine draws 2 kW, needs air at 0.4 to 0.6 MPa consuming 200 litres per minute, and measures 1,960 by 1,110 by 2,390 mm.

A high speed tea bag machine producing 105 ± 5 bags per minute, combining filling, heat sealing, threading, labelling and over-wrapping in one pass. Maximum dosage is 15 cm³ into a 65 by 62.5 mm bag, wrapped in an 82 by 75 mm envelope. The significant change in this model is that sealing pads replace the sealing rollers used in earlier generations. Rollers constrain which laminates will seal reliably; pads widen that range considerably, and the machine accordingly runs paper/PE, plastic/foil/PE and plastic/PE materials. For a producer that buys packaging locally in several markets, that flexibility decides whether one machine can serve them all. An adjustable loading system allows different bag sizes to be filled on the same machine. It runs on 2.36 kW from AC 380V or 220V, weighs 1,210 kg and measures 1.688 by 1.33 by 2.205 metres.

A high speed tea bag machine at 120 bags per minute that boxes the finished product directly instead of wrapping each bag in an envelope. Boxing counts are set to 25, 50 and 100, 30 and 60, or 20 and 40. Removing the envelope stage changes the economics of the line. Envelope material and the mechanism that applies it are both significant costs, and for tea sold by the box rather than by the individual sachet neither buys anything. The saving goes straight to unit cost on a format that sells in volume. The machine handles broken tea and similar herbs, running the complete cycle automatically: ration filling, heat sealing of the bag, thread pasting, tag linking, group dividing and counting. Maximum dosage is 6 cm³ into a 62.5 by 50 mm bag with a 210 mm thread and 28 by 24 mm tag. It runs 1.25 kW from AC 380V, weighs 540 kg and measures 1.7 by 0.9 by 2 metres.

A PLC-controlled double chamber tea bag machine running at 120 ± 10 bags per minute with a maximum dosage of 10 cm³ and a dosing accuracy of ± 5%. It produces cold-sealed double chamber filter bags measuring 45 by 60 mm, joins hard tag, thread and filter bag with a staple, and seals the outer envelope either cold or hot. The double chamber format is the reason for the machine. Two chambers give the leaf more room to move in the cup and a larger surface area for infusion, which is why premium tea brands specify it over a single chamber pillow bag despite the higher production cost. Finished bags are counted, grouped and packed into boxes automatically. The PLC coordinates the whole machine: heating part temperatures and output chute counting are both simple to set, and the machine alarms if the thread cuts or the packing material runs out. Batch quantity is counted with a straightforward reset to zero. Square marks on both envelope paper and tag paper are read to keep traction and fixed-length cutting accurate. It draws 10 kW total from a three phase 380V 50 Hz supply, weighs up to 4,250 kg, and carries short circuit, overload and creepage protection, a jog function and two emergency stops.

A wheat flour packing machine set from a keyboard, filling automatically to a quantity with weighing feedback and automatic error correction. That feedback loop is the significant part of the specification. A filler working open-loop drifts as the product density changes with moisture and batch; one that weighs the pack and corrects the next fill holds the declared weight through a run. An out-of-tolerance alarm raises anything the correction cannot absorb, so an underweight pack is caught rather than shipped. The machine also handles material control and automatic material clearing, counting, and carries electronic overload protection.

A powder filling machine for bottles, cans and bags, working in both constant volume and quantitative modes. It fills pesticides, veterinary medicine, premix, additives, milk powder, starch, spices, enzymes, feed, flour and seasoning. The two filling modes exist because powders divide into two groups. A product of stable density can be filled by volume, which is fast; one whose density shifts with moisture or batch has to be filled by weight to hold the declared quantity. Having both on one machine means a change of product does not mean a change of equipment. Control is by microcomputer with hybrid stepper motor drive, giving stable performance, high precision and low noise. The control system is built from a main control panel, sensor, electrical control panel, power supply, operating keyboard, optoelectronic switch and level control switch, with the control panel as the kernel.

A weighing and packing machine for granular products, using high precision electronic weighing under PLC control. It handles puffed chips, herbal medicine, grains, rice, pills, dried fruit, beans, nuts, salt, sugar, tea, seeds and hardware tools. Each scale is fed either by two vibrators or by a pneumatic gate. The dual vibratory feed is what gives the machine both speed and accuracy at once: a coarse feed fills most of the target weight quickly and a fine feed completes it slowly, which is how an electronic weigher hits a tight tolerance without running slowly throughout. There is no mechanical drive, so the machine runs quietly. Construction is entirely stainless steel, easy to clean and corrosion resistant. Bagging is done by hand, with a photoelectric sensor detecting the bag and triggering the blanking. Control is by PLC and the interface is straightforward to operate.

A double chamber vacuum packing machine taking plastic composite film and foil composite film bags, used for food, fruit, vegetables, chemicals, precision instruments, garments and hardware. The second chamber is what the machine is bought for. While one chamber is under vacuum the operator loads the other, so the pump runs continuously instead of waiting through load and unload. In practice that roughly doubles the output of a single chamber machine without doubling the floor space or the pump. Foil composite film is worth noting separately: it blocks light as well as oxygen, which matters for products that degrade under UV rather than through oxidation alone.

A horizontal packing machine running 40 to 230 bags per minute on 2.4 kW at 220V 50/60 Hz. It takes film up to 320 mm wide and packs bags 50 to 140 mm wide for products up to 40 mm high, across four bag length ranges covering 65 to 330 mm. Bag length is detected and set by the machine rather than entered by hand, and dual frequency conversion control sets and cuts the length in a single step. Both save film as well as time: a manually set wrapper is normally run with a margin of error built into every bag, and across a shift at 230 bags a minute that margin is a significant quantity of film. A high sensitivity photoelectric eye tracks the film registration mark automatically. Each sealer has independent temperature control, which produces a cleaner and more stable seal and allows a wider range of flexible packing materials to be run. The main control circuit uses a single chip developed in-house with a digital screen display under transducer control. The gearing is simplified, so vibration and wear are low and service life is long. The machine measures 3,770 by 720 by 1,450 mm. It packs biscuits, pies, chocolate, bread, instant noodles, ice cream, moon cake, candy and medicine, as well as hardware, paper boxes and plates.

An automatic vacuum packing machine used across the food, pharmaceutical, aquatic, chemical and electronic industries. Removing the air from a pack stops oxidation and mould, and protects the contents against corrosion and moisture, which together extend the storage life of the product well beyond what a sealed but air-filled pack achieves. For food that shelf life gain is the whole commercial case. For electronic and precision components the driver is different: it is corrosion and moisture ingress during shipping and storage rather than spoilage, which is why the same machine serves both markets. The machine runs the vacuum and seal cycle automatically rather than under operator control.

The Food 2 in 1 Shrink Packing Machine sits in our Food Processing Equipment Line Machines Plants range and is built to order for export. This model is specified with a 1.8 kW motor, a 220-240V supply, a machine weight of 250KG and overall dimensions of 1200 x 500 x 380mm. Full technical detail is set out in the specification below. Listed under Bottle Filling and Batch Coding Machinery. It ships as a single unit or as part of a larger consignment, built to the destination's electrical specification and released with complete export documentation. Send your required capacity and destination port for a specification, a delivered price and a lead time.

A tea bag packing machine forming, filling and sealing tea bags from filter paper, with tag and thread attachment and outer envelope options, for tea, herbal infusions and ground coffee bags.

Dosing accuracy is where this machine is judged, because the weight in a tea bag is small and a consistent one-gram dose is harder than it sounds with a light, bulky, variable material. Filter paper quality and the seal across it determine whether bags burst in the box or in the cup. Tagged, untagged, single and double chamber formats are different configurations. Contact us with your bag format, dose weight and required output.

A powder packing machine filling and sealing fine powder products such as flour, spice, milk powder, starch, seasoning base and detergent.

Powder is the difficult format. It aerates, bridges in the hopper, dusts into the seal area and gives a false weight if it is filled before it settles. An auger filler rather than a cup filler, a dust extraction arrangement at the fill point and a seal jaw design that clears powder are what make the difference between a machine that runs and one that jams and leaks. Contact EMC Machines Manufactures with your powder, its bulk density and your bag weights and we will specify accordingly.

Suitable for packing bundling facial tissue or napkin with 1 layer. Can pack 3,4,5 or 6,8,10 single facial in 1 bundling bag(2 lane). Can connect with full automatic single packing machine. Need 1 labor only to pack.

Full Automatic Facial Tissue Paper Bundle Packing Machine

A vertical packing machine of the vertical form fill seal type, forming a bag from a roll of film, filling it from above and sealing it, in a continuous cycle.

Vertical form fill seal is the default format for food packing because one machine makes the bag as well as filling it, so there is no bag inventory to buy and store, and the footprint is small relative to the output. Change parts give different bag widths and formats from the same machine. The filler on top is specified to the product: weigher, auger, cup or liquid. Contact EMC Machines Manufactures with your product and bag format and we will specify the machine and filler together.

A pet fish feed pellet packing machine weighing and bagging extruded fish feed pellets, built to handle a product that is light, variable in bulk density and fragile enough to break if dropped carelessly.

Feed pellets bring two specific problems to packing. Bulk density varies with the expansion achieved in the extruder, so a volumetric filler drifts off weight as the product changes, and broken pellets mean fines in the bag, which a fish farmer sees immediately as waste in the water. Weigh filling and gentle product handling address both. Bag sizes run from small retail packs to farm sacks. Contact us with your pellet size, bag weights and output rate.

A packing machine for weighing and bagging finished food product, closing the line between production and dispatch so output does not stall at the last step.

Packing is where under-investment shows most clearly, because a production line that outruns its bagger simply builds up product on the floor. Matching bagger speed to line output is therefore the sizing decision, along with the bag format your market expects: pillow bags for snacks, gusseted bags for bulk, stand-up pouches for retail premium. Film type and weight range follow from that. Contact EMC Machines Manufactures with your bag size, weight range and required bags per minute and we will recommend the machine.

A snack packing machine bagging crisps, extruded snacks, nuts and similar light products, with the gas flush and gentle handling that fragile snacks require.

Snack packing has requirements the general-purpose baggers do not meet. Product is light, so weighing needs a multihead weigher to be both fast and accurate; product is fragile, so drop heights and chute design matter; and product goes stale, so nitrogen flush is usually needed to displace oxygen and also to cushion the contents in transit. Those three points define the machine. Contact EMC Machines Manufactures with your product, bag size and bags per minute and we will specify it.