Results for “C”

The Construction 160HP Hydraulic Dozers sits in our Construction Machinery and Equipments range and is built to order for export. This model is specified with a rated capacity of 4, a 160 hp motor and a machine weight of 16800 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. Available as a single machine or consolidated into a bulk shipment, built to your site voltage and supplied with full export paperwork. Send your required capacity and destination port for a specification, a delivered price and a lead time.

Construction 160HP Hydraulic Driven Crawler Bulldozer

Construction 160HP Hydraulic Driven Crawler Swamp Bulldozer

The mechanical drive build of the 160 HP swamp dozer is specified where the work is heavy, the ground is soft and support is thin. On wide-track machines working soft ground, mechanical transmission has a practical advantage: there is less to go wrong far from a workshop, and what does go wrong can usually be put right on site. Wetland and reclamation contracts are almost always remote contracts. Wide tracks spread the machine's weight over a large footprint, keeping ground pressure low enough to operate on peat, paddy and soft fill. The correct track width depends on the bearing capacity of the ground you are working, which is why it is specified rather than fixed. Configuration is set at order against the buyer's own requirement, including tenders carrying their own technical annexure.

A swamp dozer differs from a standard crawler in one respect that governs everything else: the tracks are much wider, so the machine's weight is spread over a far larger footprint and ground pressure falls sharply. That is what lets it work on paddy, peat, reclaimed land, tailings and soft river margins where a standard dozer would sink and have to be recovered. At 160 HP the machine has the power for genuine bulk work rather than light land forming. The trade-off is that wide tracks reduce manoeuvrability and wear faster on abrasive ground, so the track width should be matched to the actual bearing capacity of the site, not simply specified as wide as possible. We build these to the buyer's requirement. State the ground conditions and the ground pressure the contract allows, and the undercarriage, blade and cab are configured to suit.

We manufacture the Construction 160HP Swamp Dozers as part of our Construction Machinery and Equipments range, for single-unit and bulk supply. Key figures for this model include a rated capacity of 4, a 160 hp motor and a machine weight of 18500 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. It is supplied as a single unit or in bulk container loads, built to the electrical supply of the destination and released with the export documentation the shipment needs to clear customs. Tell us the throughput you require and where it is going, and we will quote delivered with a lead time in writing.

A 165 HP hydraulic dozer is specified where blade accuracy matters as much as volume. Independent hydraulic drive to each track allows the operator to feather one side against the other, hold a line on a slope and counter-rotate in place. Contractors doing finish grading, canal profiles and formation work to tolerance choose hydraulic drive for that reason. The machine is built against the buyer's own schedule. Blade type, ripper, undercarriage, cab and emission compliance are all set at order, and where a tender defines its own technical annexure we manufacture and quote to that document.

Construction 165HP Hydraulic Driven Crawler Bulldozer

This machine combines two features that are usually specified for different reasons. The swamp undercarriage spreads weight across wide tracks so the dozer can work ground that will not carry a standard machine, and hydraulic drive gives independent track control for turning tightly and holding a blade line at low speed. Together they suit reclamation, canal and wetland work where the machine has to be both light-footed and accurate. At 165 HP it has the power for continuous bulk pushing rather than light forming alone. We manufacture to the buyer's specification, including against a tender's own technical annexure, rather than supplying a fixed build.

Construction 165HP Swamp Dozers is manufactured and exported by EMC Machines Manufactures as part of our Construction Machinery and Equipments range. Key figures for this model include a rated capacity of 7, a 165 hp motor and a machine weight of 19400 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. It is supplied as a single unit or in bulk container loads, built to the electrical supply of the destination and released with the export documentation the shipment needs to clear customs. Send the output you need per hour and the destination port for a delivered price and a lead time.

At 170 HP the motor grader moves from maintenance into formation work: cutting subgrade, trimming base course to tolerance and forming road profile on new construction rather than restoring an existing one. Formation work is measured against a tolerance, so the questions at order are about accuracy and reach as much as power. Moldboard length, circle drive, articulation and whether the machine carries grade control determine whether it can hold the tolerance a contract specifies over a long pass. Manufacture is to the buyer's own schedule, and a tender annexure is quoted and built against in full.

This roller is offered at 18, 20, 22 and 26 tonnes with frequency and amplitude modulation. Variable frequency and amplitude is the significant feature: rather than switching between two fixed settings, the machine adjusts its vibration to the stiffness of the layer beneath it. That matters on mixed fill, where a setting that compacts one section will over-compact and loosen the next. Weight class and control configuration are specified at order and built to the tender schedule.

Construction 180 Rotary Drilling Rigs

An 18,000 litre sewage vacuum suction truck is the largest class in ordinary service, used for treatment works, industrial sites and bulk transfer where the vehicle is effectively a mobile tanker with a vacuum system. Capacity of this order carries a stability consideration: eighteen tonnes of moving liquid needs proper baffling and an axle configuration rated for it. Tank, chassis and vacuum system are specified as one package against the duty.

Construction 180HP Hydraulic Crawler Bulldozers

Construction 180HP Hydraulic Driven Crawler Bulldozer

A forestry dozer is a crawler machine protected for work among standing and felled timber. The difference from a standard dozer is in what is added rather than what it pushes: guarding over the cab and radiator, protection for cylinders and lines, sealing against debris, and commonly a winch for extracting timber and recovering the machine. At 180 HP in mechanical drive it is specified for land clearing, forest road formation and skidding support, where the machine works away from any service network and has to be repairable in place. Guarding package, winch, blade and cab are all built to the buyer's requirement rather than supplied to a single fixed forestry build.

The 180 HP swamp dozer in mechanical drive is specified where the work is heavy, the ground is soft and the support is thin. Mechanical transmission keeps the drivetrain simple enough to maintain with the owner's own fitters, which matters on reclamation and wetland contracts that are usually a long way from a service centre. The wide-track undercarriage is what allows the machine to operate at all on peat, paddy and soft fill, by spreading its weight far enough to stay above the bearing limit of the surface. Undercarriage, blade, cab and compliance are configured at order and manufactured to the buyer's specification.

A 180 HP motor grader is specified for heavy formation and for mine haul road maintenance, where the machine works continuously in coarse material and the blade is loaded hard for long passes. Duty of that kind is hard on the circle and the moldboard rather than on the engine, so the wear specification is where the machine is won or lost: circle wear inserts, blade thickness, and cutting edge material all decide what the grader costs to keep working over a year. Build is to the buyer's requirement, including against a tender technical annexure where one is issued.

At 180 HP the swamp dozer moves into heavy bulk work on ground that will not carry a conventional machine. The wide-track undercarriage keeps ground pressure low across peat, paddy, tailings and reclaimed land, while the power class allows sustained pushing rather than intermittent light forming. The heavier the machine, the more the track width has to be matched properly to the bearing capacity of the site. Specifying tracks wider than the ground actually needs costs manoeuvrability and undercarriage life for no gain. Build is to the buyer's own requirement, quoted and manufactured against the tender schedule where one is issued.