Results for “16”

Construction 16 Ton Firefighting Trucks is manufactured and exported by EMC Machines Manufactures as part of our Construction Machinery and Equipments range. Key figures for this model include a rated capacity of water tank 12M3, a 206 kW motor and a machine weight of 15550kg. Full technical detail is set out in the specification below. Listed under Fire Fighting Truck. It is supplied as a single unit or in bulk container loads, built to the electrical supply of the destination and released with the export documentation the shipment needs to clear customs. Send the output you need per hour and the destination port for a delivered price and a lead time.

Construction 5, 16, 26, 35, 55, 75 Ton Telescopic Crawler Crane

A 16 tonne single drum roller sits in the most widely specified band for highway and airfield earthworks. It carries enough static weight to compact deep lifts of granular fill while remaining practical to move between sections of a linear job. Drive is mechanical, which suits contractors maintaining their own plant at distance from a workshop. Drum configuration, amplitude range and cab are all specified at order against the contract's compaction schedule.

This entry covers the mechanical drive single drum roller at 14, 16 and 18 tonnes. Offering the band rather than a single weight is deliberate, because the right machine follows from the works specification rather than from a preference: lift thickness, material and target density together determine the drum weight needed. Once the weight is settled, drum type, amplitude range and cab are configured to the contract and the machine is built to that.

Construction160HP Hydraulic Driven Crawler Bulldozer

Construction 165HP Swamp Dozers is manufactured and exported by EMC Machines Manufactures as part of our Construction Machinery and Equipments range. Key figures for this model include a rated capacity of 7, a 165 hp motor and a machine weight of 19400 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. It is supplied as a single unit or in bulk container loads, built to the electrical supply of the destination and released with the export documentation the shipment needs to clear customs. Send the output you need per hour and the destination port for a delivered price and a lead time.

This machine combines two features that are usually specified for different reasons. The swamp undercarriage spreads weight across wide tracks so the dozer can work ground that will not carry a standard machine, and hydraulic drive gives independent track control for turning tightly and holding a blade line at low speed. Together they suit reclamation, canal and wetland work where the machine has to be both light-footed and accurate. At 165 HP it has the power for continuous bulk pushing rather than light forming alone. We manufacture to the buyer's specification, including against a tender's own technical annexure, rather than supplying a fixed build.

Construction 165HP Hydraulic Driven Crawler Bulldozer

A 165 HP hydraulic dozer is specified where blade accuracy matters as much as volume. Independent hydraulic drive to each track allows the operator to feather one side against the other, hold a line on a slope and counter-rotate in place. Contractors doing finish grading, canal profiles and formation work to tolerance choose hydraulic drive for that reason. The machine is built against the buyer's own schedule. Blade type, ripper, undercarriage, cab and emission compliance are all set at order, and where a tender defines its own technical annexure we manufacture and quote to that document.

We manufacture the Construction 160HP Swamp Dozers as part of our Construction Machinery and Equipments range, for single-unit and bulk supply. Key figures for this model include a rated capacity of 4, a 160 hp motor and a machine weight of 18500 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. It is supplied as a single unit or in bulk container loads, built to the electrical supply of the destination and released with the export documentation the shipment needs to clear customs. Tell us the throughput you require and where it is going, and we will quote delivered with a lead time in writing.

A swamp dozer differs from a standard crawler in one respect that governs everything else: the tracks are much wider, so the machine's weight is spread over a far larger footprint and ground pressure falls sharply. That is what lets it work on paddy, peat, reclaimed land, tailings and soft river margins where a standard dozer would sink and have to be recovered. At 160 HP the machine has the power for genuine bulk work rather than light land forming. The trade-off is that wide tracks reduce manoeuvrability and wear faster on abrasive ground, so the track width should be matched to the actual bearing capacity of the site, not simply specified as wide as possible. We build these to the buyer's requirement. State the ground conditions and the ground pressure the contract allows, and the undercarriage, blade and cab are configured to suit.

Construction 160HP Hydraulic Driven Crawler Swamp Bulldozer

The mechanical drive build of the 160 HP swamp dozer is specified where the work is heavy, the ground is soft and support is thin. On wide-track machines working soft ground, mechanical transmission has a practical advantage: there is less to go wrong far from a workshop, and what does go wrong can usually be put right on site. Wetland and reclamation contracts are almost always remote contracts. Wide tracks spread the machine's weight over a large footprint, keeping ground pressure low enough to operate on peat, paddy and soft fill. The correct track width depends on the bearing capacity of the ground you are working, which is why it is specified rather than fixed. Configuration is set at order against the buyer's own requirement, including tenders carrying their own technical annexure.

Construction 160HP Hydraulic Driven Crawler Bulldozer

The Construction 160HP Hydraulic Dozers sits in our Construction Machinery and Equipments range and is built to order for export. This model is specified with a rated capacity of 4, a 160 hp motor and a machine weight of 16800 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. Available as a single machine or consolidated into a bulk shipment, built to your site voltage and supplied with full export paperwork. Send your required capacity and destination port for a specification, a delivered price and a lead time.

Construction 160HP Crawler Swamp Bulldozers

Construction 160HP Crawler Bulldozers forms part of the Construction Machinery and Equipments equipment we build and ship to buyers overseas. This model is specified with a rated capacity of 4, a 160 hp motor and a machine weight of 17400 kg. Full technical detail is set out in the specification below. Listed under Bulldozer. It ships as a single unit or as part of a larger consignment, built to the destination's electrical specification and released with complete export documentation. Send the output you need per hour and the destination port for a delivered price and a lead time.

Rotary drilling excavators in 160, 200, 220 and 260 class sizes — rotary drilling rigs for bored pile foundations, drilling and casing shafts for cast-in-place concrete piles.

Rig selection follows from the pile schedule rather than from the machine. Required pile diameter and depth, together with the ground conditions, determine the torque and crowd force needed, and a rig chosen a class too small simply will not reach the depth in hard ground. The four classes here cover the common range of building and bridge foundation work. Contact us with your pile diameter, depth and a soil report and we will advise on the class required.