Results for “P”

A pet feed machine for producing dry food for dogs, cats and other companion animals, covering the cooking and forming stage of manufacture.

Which species the machine will serve should be settled before it is specified, since it affects die and cutter selection and the flexibility needed for recipe changes between products. A machine set up for one species can usually be adapted later, but designing for the full range from the outset is cheaper and avoids downtime. Contact us with the species and products you intend to cover and we will specify accordingly.

A pet fish feed pellet packing machine weighing and bagging extruded fish feed pellets, built to handle a product that is light, variable in bulk density and fragile enough to break if dropped carelessly.

Feed pellets bring two specific problems to packing. Bulk density varies with the expansion achieved in the extruder, so a volumetric filler drifts off weight as the product changes, and broken pellets mean fines in the bag, which a fish farmer sees immediately as waste in the water. Weigh filling and gentle product handling address both. Bag sizes run from small retail packs to farm sacks. Contact us with your pellet size, bag weights and output rate.

Pet food equipment covering the stages of dry pet food manufacture: mixing, extrusion, cutting, drying, fat and palatant coating, cooling and packing.

Equipment is supplied individually or as complete lines, depending on whether you are building from nothing or extending what you already have. Where existing machines are staying in the line, matching the capacity of the new equipment to them is the first consideration, otherwise the investment buys less additional output than expected. Contact us with an inventory of your current setup and your target output for an equipment list and quotation.

A combined pet food and fish feed extruder, producing dry dog food, cat food and aquatic feed pellets from one installation. All three are made by extrusion and differ in formulation, die and operating settings.

For a producer serving both the pet and aquaculture markets this avoids duplicating a line, and makes it practical to move between the two as seasonal demand shifts. Changeover is a recipe and die change. Contact us for the die sets and configuration needed to cover the products in your range.

A pet food extruder for dog food manufacturing, cooking and forming the mix into kibble in a single pass through the barrel.

The extruder is where the formulation becomes food: cooking gelatinises the starch and makes the ingredients digestible, which a simple pressed pellet does not accomplish. It is also where kibble shape, size and density are fixed, and no subsequent stage will alter them. Specification follows from your recipes and your intended formats rather than from tonnage alone. Contact us with both and we will recommend a screw configuration and die set.

A pet food extruder available for sale with full specification, export documentation and delivery to your nominated port, supplied in single and twin screw configurations.

We manufacture the equipment rather than reselling it, so specification changes, additional die profiles and spare parts come from the same source as the machine. For buyers importing into regions without local technical support, continuity of supply for wearing parts over the life of the machine matters considerably more than the initial purchase price. Contact us with your requirements and destination for a quotation covering equipment, documentation and shipping.

Pet food extruder machinery covering both single and twin screw configurations for dry pet food production, supplied with the die sets appropriate to your product range.

The choice between them is governed by the formulation rather than by output. Twin screw machines handle high fat, fresh meat and high moisture recipes that a single screw cannot convey consistently; single screw machines cost less to buy and are simpler to maintain where the recipe is stable and dry. Both are legitimate choices for the right product. Contact us with your formulations and we will compare the two against them honestly.

A pet food machine producing dry kibble for dogs, cats and other companion animals, covering the cooking and forming stage of the manufacturing process.

It is supplied as a single machine or as the centre of a complete line, with mixing ahead of it and drying, fat coating and cooling after. Which you need depends on what you already have in place: producers scaling up often have mixing and bagging and need only the extrusion and drying stages, and there is no sense replacing equipment that works. Contact us with your intended output and an inventory of your existing machines.

A pet food making machine for producing dry pet food from a prepared formulation, covering cooking and forming with drying and coating following in the line.

Bringing production in-house gives control over the recipe and removes the minimum order quantities that contract manufacturers impose, which is often the real constraint on a growing brand rather than the unit cost itself. Whether it pays depends on your volumes and on how often your recipes change. Contact us with your current production figures and we will give a straight answer on whether the investment makes sense at your scale yet.

Pet food manufacturing equipment for commercial scale production, covering the route from raw material intake through to bagged finished product.

Commercial manufacture requires consistency across long runs, mechanical handling between stages and bagging at line speed, none of which small batch equipment is built to provide. The equipment is specified for that duty from the start. Capacity, automation level and the number of products the line must carry are agreed at the design stage, since they affect layout and intermediate storage. Contact us with your intended output and product range for a plant proposal.

Pet food manufacturing machinery supplied as individual machines or as complete production lines for dry pet food, covering dogs, cats and other companion animals.

Specification follows from three answers: your daily tonnage, the species and kibble formats in your range, and whether you are starting from nothing or extending an existing line. Those determine most of the rest of the decision, including whether a single or twin screw extruder is appropriate and how the drying stage should be sized. Contact us with those details and we will prepare an equipment list, layout drawing and quotation covering delivery to your port.

A pet food pellet machine producing pelleted rather than extruded pet food, pressing the formulation through a die without the cooking and expansion that extrusion applies.

The result is denser and less palatable than extruded kibble but considerably cheaper to produce, both in capital cost and in energy per tonne. That suits economy products, kennel feeding and bulk supply where cost per kilo governs the sale rather than shelf appeal. Pellet diameter is changed by fitting a different die. Contact us to discuss which route suits the product and market you are aiming at.

Pet food processing equipment covering mixing, extrusion, cutting, drying, fat and palatant coating, cooling and packing for dry pet food manufacture.

Equipment is available individually or as a matched line. Where machines are being added to an existing installation, the capacity of what remains determines what the new equipment should be: fit a faster extruder ahead of an undersized dryer and you simply move the bottleneck rather than remove it. We check the whole line before quoting on any part of it. Contact us with an inventory of your current machines and your target output for a recommendation.

A pet food processing line for continuous dry pet food manufacture, supplied as a matched set from mixing through extrusion, drying, coating and cooling to packing.

Sizing the stages against each other is what determines whether the line reaches its rated output in practice. In pet food lines the dryer is most commonly the limiting stage, because drying time is governed by the physics of moisture removal and cannot be compressed the way throughput elsewhere can. We size the line around it. Contact us with your target tonnage and building dimensions for a layout and equipment list.

Pet food processing machinery for dry kibble production, covering the full manufacturing route from mixing through to packing.

Machinery is specified around output, product range and formulation. Formulation deserves particular attention: recipes with high fat content or fresh meat inclusion need a twin screw extruder to convey and cook them consistently, and discovering that after the equipment has been delivered is an expensive correction to make. We would rather ask the question first. Contact us with your recipes as well as your tonnage and we will specify against both.

Pet food processing machines supplied individually or as complete lines, covering mixing, extrusion, cutting, drying, coating, cooling and packing.

We supply new producers setting up from nothing and established manufacturers adding capacity or replacing worn equipment. The two situations call for quite different advice: a new entrant needs a complete specification and commissioning support, while an established producer usually needs one machine matched carefully to what already exists. Contact us with your circumstances, your current equipment and your intended output, and we will put together an appropriate proposal.

Pet food production equipment for manufacturing dry food for dogs, cats and other companion animals at commercial scale, covering the full route from intake to bagging.

The equipment is built for continuous shift operation rather than intermittent production, which is what keeps the product consistent from the beginning of a run to the end. Batch processes drift as conditions change, and that drift shows up in the bag as variation in colour, density and size. Capacity and automation level are specified at the order stage. Contact us with your intended output and operating pattern for a quotation.

A pet food production line covering the complete route from raw materials to bagged finished kibble, supplied as a matched installation with handling between stages.

Mixing, extrusion, drying, fat and palatant coating, cooling and packing are sized together rather than chosen individually. The coating stage deserves particular attention when specifying: it is where palatability is created, and it is the difference between a product an animal eats readily and one it leaves in the bowl. Contact us with your product range and target tonnage for a line proposal and layout drawing.

Pipe Cuter Heavy Duty

Pipe Vice Piller Type